SDI/ASI 270Mbps audio de-embedder & fiber optic transport

VS501-OE
VS501 receiver card ~ SDI / ASI O/E, -32dBm optical sensitivity with 2 x AES or 4 x analog audio de-embedding. Balanced AES connector panel.
  • SDI, SDTI and DVB-ASI compatible
  • Removes timing and alignment jitter from the SDI signal
  • Passes SMPTE-259M 270 Mbps SDI pathological sequence test
  • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both
  • Asynchronous or synchronous 48Khz audio with 2o-bit audio resolution
  • Default SDI keep alive signal
  • AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs
  • Inband network management
  • Automatic cable equalization up to 300m for Belden 8281
  • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths
  • NEBS Level 3 compliant
  • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Specifications

LED indicators

Generalsame as the VS312

Digital video

StandardsSDI (SMPTE-259M)/SDTI (SMPTE-305M)/DVB-ASI (EN50083-9)
Data Rate270Mbps
# of Outputs2
# of Inputs1
ConnectorBNC
Impedance75 Ohm
EqualizationUp to 300m w/Belden 8281

Digital audio

StandardsAES/EBU (SMPTE-272M)
# of Outputs2 (VS501-OE)
# of Inputs2 (VS501-EO)
ConnectorBNC (unbalanced). 3-pin terminal (balanced)

Analog audio

StandardsExceeds RS250C short haul specs
# of Outputs4 (VS501-OE)
# of Inputs4(VS501-EO)
Connector3-pin terminal

Optical receiver

# of inputs1
Fiber typeSingle mode
Receiver typePINFET pigtail
ConnectorSC/PC
Input wavelengths1260nm - 1620nm
Sensitivity<-34dBm
Max input power0dBm

Element management

GeneralCompatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the cards status, alarms and controls. Note: same as the VS312 plus the following:
StatusVS501-EO uplink transmitter status (VS501-OE)/model & serial number
AlarmsLaser transmitter failure (VS501-EO)/optical low light (VS501-OE)/VS501-EO uplink transmitter alarms (VS501-OE)
ControlsLaser transmitter enable/disable (VS501-EO)/electrical/optical receiver input mode (VS501-OE)/ID setting for the VS501 (0-65535)

Physical and environmental

GeneralResides in a single slot of a VS101 or VS103 Ventura series chassis
Power consumption7W typical
Operating temperature0 to 50C chassis ambient
Storage temperature-40C to 85C ambient
Relative humidity5% to 85%
ComplianceNEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick
Voltage+3.3V, +5V, +12V, -12V